Battlezone 1

I have a issue with battlezone 1.

I have Windows XP
AMD Anthlon 65 X2 Dual Core Processor 4400+
2 Gigs of memory
Nvidea 8600 GT PCI 1.0
I use on board sound

Here is what happens to me. After about 30 minute or so of playing the ground goes yellow alot with everything except the sky I have already try compatibility mode of windows 98, and turning all the graphics settings to the lowest they can go but it still happens. And even put the game resolution to my size of my desktop and it still does not work.

Do you know what might be going with my game?

Software works better then hardware surprisingly because when i used harware mode on original bz1 on cd it messed up like topguns. I was able to get it to work and yes it was comodo firewall pro v2.4 free. I usually keep it in windowed mode anyways since it runs better.

Are you using the Configuration utility to lauch game topgun and what options are selected?

By the way, I am back.

Now then...
My specs are:

Windows Vista Home Premium
2.0GHz Dual Core Processors
3.5GB of RAM
Intel Graphics Media Accelerator (graphics are onboard)

I got the hard drive in Geppetto's laptop replaced, and XP wouldn't install, so I got Windows 7. I assume it's 32 bit.

Windows 7 Home Premium 32 bit
1.6 GHz processor
1 GB RAM

I expected to have issues after reading posts on this forum about Windows 7, but I installed Battlezone and it ran just as well as it does on my XP laptop... flawlessly. Didn't need any compatibility mode at all.

Hi there,
Im testing some options at the moment und trying to squeeze out the best ingame-graphic qualitity possible on my older rig.
Specifications are:
Turion 1.60 Ghz
1.5 GB RAM
Radeon Xpress 200, 128MB shared Memory, Catalyst 12.08, no overclocking yet

After recognising that the use of FRAPS and AA results in crappy fps, I did some shots with another Screenshot-Tool.
I did that with three scenes from NSDF mission 1.
The first is alway in 640x480 with all graphical options on.
The second was made on 1024x768, resized to 640x480, 150% view-distance and with 2xAA and 8xAF, so I guess this should be the nearly best you can squeeze out of the engine (at least on my rig).

1:



2:



3:

I can't even play the game in Vista, dual boot to XP if you really want to play the game well.

Windows 7 Ultimate 32 bit.
3.00 GHz
1.00 GB of RAM.
Has NVIDIA Quadro NVS 285.

I originally believed that Bz wouldn't run on my machine due to it normally crashing on the Win7. That was the case until the Vulcan made me aware that 800x600 resolution or higher is needed to successfully work bz on Win7.

Works flawlessly; here's how it looks on my screen.

Hey! I'm also getting the error that I don't have enough memory period. The game won't turn on. Here's my stats.

OS: Windows Vista 64-bit
CPU: Quad-core 2.4GHz
RAM: 4-gigabytes
Graphics Card: ATI Radeon 5670

I have it working fine on my XP netbook computer, but I'd like to use my main computer; largely because I'm working on a Starcraft 2 Battlezone mod.

Edit by admin:
Moved here - http://www.battlezone1.org/sorry-there-is-not-enough-memory-to-continue-t1444.html

System
--------------------------------------------------------------------------------

Manufacturer Gateway
Model M-6850FX
Total amount of system memory 3.00 GB RAM
System type 32-bit operating system

Graphics
--------------------------------------------------------------------------------

Display adapter type ATI Mobility Radeon HD 2600
Total available graphics memory 1791 MB
Dedicated graphics memory 512 MB
Dedicated system memory 0 MB
Shared system memory 1279 MB
Display adapter driver version 8.631.0.0
Primary monitor resolution 1920x1200
DirectX version DirectX 10

I can only run in windowed mode from config tool, want to get red oddessey up and running but cant get past an "unhandled exception" message. Any ideas?

Edit by Mr. Spock: Discussion is continued here.

You didn't mention what operating system you have. (for example, Windows XP, Windows Vista, Windows 7, etc)

EDIT:

Nevermind.

My game runs perfectly in any mode, other than the map glitches. I guess I'm just seeing if there's a way to fix the issue of stuff on the map showing up as just red, white, or green boxes.

OS - Windows Vista x64bit
RAM - 8GB
Graphics - Integrated NVIDIA GeForce 9100
BZ Installation - BZ98 Installer v1.4
Issue - Just the map stuff.

I assume it's just a thing between my graphics "card" (integrated chip) and BZ, but I'm not 100% sure.

Well my bz install is 1.4 - I can play the missions fine - with full HW acceleration - I can't see the compass direction letters tho its just white blocks... When I go online I get into the loby - into the game room - and then it says Success - try and launch nothing happens eventually I get could not connect to game.

I have forwarded ports 21000 - 22000


OS Name Microsoft Windows 7 ROG (64 Bit)
Version 6.1.7600 Build 7600
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name WIN-7IUPJGO57L6
System Manufacturer Hewlett-Packard
System Model Compaq Presario CQ60 Notebook PC
System Type x64-based PC
Processor AMD Athlon Dual-Core QL-65, 2100 Mhz, 2 Core(s), 2 Logical Processor(s)
BIOS Version/Date Hewlett-Packard F.54, 8/18/2009
SMBIOS Version 2.4
Windows Directory C:\Windows
System Directory C:\Windows\system32
Boot Device \Device\HarddiskVolume1
Locale United States
Hardware Abstraction Layer Version = "6.1.7600.16385"
User Name WIN-7IUPJGO57L6\Administrator
Time Zone GMT Daylight Time
Installed Physical Memory (RAM) 3.00 GB
Total Physical Memory 2.75 GB
Available Physical Memory 1.24 GB
Total Virtual Memory 4.75 GB
Available Virtual Memory 3.04 GB
Page File Space 2.00 GB
Page File C:\pagefile.sys

I've got three problems to keep you guys on your toes

First my laptop:
OS - Win7 32bit
RAM - 1.00GB (766 MB usable)
Graphic card - ATI Radeon 3100
Driver - ati, version 8.632.1.2000
BZ installation - BZ v1.4
Issue - 1.4 will not run, error "unhandled exception" shows.

Home Desktop (2 problems)
OS - Win7 32bit
RAM - 4.00GB (3.50GB usable)
Graphic card - Nvidia Geforce 7600GT
Driver - Nva, version 8.12.12.6099
BZ installation - BZ v1.4 & BZ v1.5
Issue - 1.4 will not run, error "unhandled exception" shows. 1.5 game will crash if a lot is going on in a game, for example if I use a thumper get caught in it wile another tank is exploding the game will crash.

1.4 can't run on that laptop in HW mode. Your only option is Win mode or SW mode.

On desktop PC set BZ resolution to 800x600 or higher. That should fix 1.4 issue. 1.5 issue should be reported to Ken.

OS: Windows XP/Win 7
intel C2Q Q6600
4GB DDR2 RAM
Nvidia Geforce 8800 GTS
Bz Installer v1.3
Router: 2 netgear wired/wireless routers
Modem: Simens Speedstream 4800
Problem: Even after port forwarding the correct ports to the correct internal ip i still get 100% loss.